Call Us: (732) 500-3229


9 Proven Methods To Cut Down on Your Heating Service

Heating expenses can add up over time. By increasing the effectiveness on your heating services you can reduce heating costs. Use proven methods to reduce the expenses on heating services. We have compiled the following list for you

    The first thing to do is approach the best and most trusted heating services provider, such as WJR Advanced Heating & Cooling. This guarantees that you are getting standard rates and high quality.
    You will achieve standard efficiency if you change your air filters regularly. It ensures efficiency and effectiveness overall. This saves you from unnecessary expenses on repairs. It also saves you time..
    Maintaining the temperatures between 60º and 68º Fahrenheit’s is very important. Many people will believe that 68º to 70º is the correct temperature but it does also feel normal a little bit lower. So, go ahead and turn down the thermostat and save more money.
    You have heard of ads promising that cleaning the duct makes heating and air circulation improve. If you bought into the idea, you already know that it does not improve much of anything. Instead, it is time to seal the duct.
    Ensure there is no cold air leaking through the door. You can use an incense rod to test. Light it and see if the smoke gets distorted at the door. In extreme cases, you may even feel it when you sweep the back of your hand across suspected section. Choose a proper way to seal these leaks if present. As a side note, turn the exhaust fans on so that you can detect any air leaking in.
    What about these exhaust fans? Make sure that you avoid excess of them. It does not mean that you should uninstall some of them. Only use them within good limits as long as the air remains fresh.
    The heating fuel you choose too affects costs. There are recommended heating fuel and methods to use. Switch to natural gas. However, you will have to cope with the $10,000 initial installations required. Within just 7 years, you will have recovered all the initial installation expenses. You may begin to get up to 50% savings as compared to using oil or up to 200% compared to use of electricity.
    Check for proper insulation. Always choose the best company to do this. Later, find out if there is any significant improvement. Always monitor the effectiveness of this insulation in case repair or replacement is required.
    There is really no need to heat a bathroom. It wastes energy as well as placing you at great risk if you are using electricity. There are claims on some equipment being safe for use close to water. These are just heating services advertisements. It is recommended to avoid bathroom heating.

By following some of these tips, you will save a great amount of money in heating.


WJR Advanced Services are serving the areas of Toms River, Marlboro and Red bank in New Jersey. Call us now (732 500-3229) to get expert services in heating system repair and emergency furnace repair.

Preventing HVAC Systems from Power Surges

Ensuring that our homes are comfortable all the time is very important. To combat winter cold and summer heat, heating, ventilation and air conditioning systems also known as HVAC systems are very important. HVAC system is made of several units with the largest being the outdoor cooling unit. It has components such as air delivery devices, motors, boilers, terminals, heaters and chillers. All these components require electricity to function efficiently.


Power surges occur when electrical current is boosted above the optimum level at some point in the power line.


Strong thunderstorm produces lightning. The lightning can cause a chief risk to your HVAC system. Apart from the natural thunderstorm that can cause risks to the system, workers activities can also result to power surges and outages. The effects of surges on HVAC equipments can be detrimental. A power surge can impact negatively on the HVAC system as well as the equipments associated with it.


This calls for surge prevention as the results of the opposite are deadly. Although it’s not possible to control surges, there are precautions to prevent them from harming the HVAC system equipments.


Use Surge Protection


Surge protection is the process of ensuring that excess electricity is buffered if a power surge happens to occur. Whole home surge protection is a mile stone toward protecting the HVAC system and other appliances from damages caused by power surges. This protection is put at the point of entry of the main power line. Additionally power strips with surge protection capability can be used in each outlet. All HVAC equipments should be plugged into one power strip. Make sure that the surge protection in the power is functioning properly.


Make use of Time delay Technology


Power surges can also be caused by a power outage as the grid stabilizes. During stabilization process brief power spikes continue for a few minutes after power is restored to normal. If the HVAC system equipments happens to start instantly upon the reinstatement of power, these spikes could cause unprecedented damages. Using a thermostat with time delay technology will help in preventing the system from turning on instantly after power is restored. The technology will keep the system off for a few minutes, to allow the grid to stabilize before restarting the system.


Turn off the System


This is one of the easiest ways to prevent power surges from harming the HVAC system. Turning off the system at the circuit breaker or thermostat or both before a storm occurs. The HVAC system can be expansively damaged by a power surge if operating at the time when the surge occurs. Thus, turning it off will greatly reduce the damages that could arise If the air conditioning is on operation at the time of storm. It’s also advisable to turn off windows unit or room air conditioners and unplug them so as to prevent any damage by power surges for those who uses only the windows unit.


Upgrade Inadequate Wiring


Electrical systems built before 1980s were not designed to handle large voltage equipments. Some of the visible signs of insufficient wiring include frequent blown fuses, tripped circuit breakers and flickering or dimming light. Upgrading to the current wiring standards with the capacity to support equipment with high voltage consumptions can greatly help in preventing the surges.


Fix Overloaded Circuits


Many newer homes have the problem of overloaded circuits. Having a circuit with many small devices can cause power surges. To prevent HVAC system appliances from suffering from the damage, it’s important to establish a dedicated circuit for each big appliance and to partition rooms with multiple devices into split circuits.


WJR advanced services are serving the areas of Toms River, Marlboro and Red Bank. Call us now (732 500 3229) to get expert services in Heating System repair and Emergency Furnace repair.

Prepare for Cold Weather in New Jersey with Heater Maintenance

When your environment is cold, you are naturally drawn to heat. As winter reaches its peak in New Jersey, it is important to have a source of heat in your house. However, when winters are a bit harsh you need your heating system to work at optimum condition. If your furnace is broken down or not producing as much heat, then it’s high time you found a heater maintenance service provider.


Heater Maintenance


Heater maintenance is a preventative measure that ensures your heating system is working in optimum condition. As a regular part of heater maintenance you should probably clean your heating system even when it’s not in use. This is because dirt is the biggest enemy of all heating systems. Heating systems can be complicated for most of us and their maintenance even more so. A basic heating system consists of the source of heat, the heat distribution system and the temperature control. For the intrinsic maintenance of the heating system, you need a heater maintenance expert to help keep your system sound.


Why Heater Maintenance is Important 


Saves Money: A badly maintained heating system is not efficient and it ends cost you more to heat the same house than when the heater was new. To lower your energy bills over winter call a heater maintenance expert.


Carbon Monoxide: most heating systems e.g. furnaces may use combustible components such as gas. When there’s incomplete combustion carbon monoxide forms .if the furnace is not maintained regularly t produces higher amounts of carbon monoxide which is poisonous. Tune up by the heater maintenance expert ought to make it right


Short Lifespan of the Heater: heater maintenance is preventative. It saves you from having to replace the heating system entirely .Regular heater maintenance should be done at the beginning of the cold season to clean all the dirt that has accumulated over the summer season when the heater was inactive. Dirt is known to wreak havoc with the blower, filter system and motor. If they malfunction and it goes undetected this shortens the lifespan of the heating system


Good Indoor Quality of Air: During heater maintenance cleaning your furnace duct system helps improve the air quality. Dirt blocks the air filter and moisture collected n the ducts can cause house molds. Heater maintenance reduces the presence of dirt particles, allergens and house molds from your system as well as the hot air expelled.


Void the Warranty: when you buy a new heating system there is a warranty offered. Most manufacturers recognize that the lifespan of the heating system is subject to regular maintenance by a licensed professional. If you don’t maintain your system regularly the manufacturer can void the warranty. This means that you are responsible for the entire heating system repair and replacement.


To get quality heater maintenance services as for a licensed professional who will come to your house access the problem before giving you an estimate. Different levels of maintenance require different expertise and hence the cost varies. It is good to err on the side of caution therefore ask to see their license and accreditation before inviting them into your house.


WJR advanced services are serving the areas of Toms River, Marlboro and Red Bank. Call us now (732 500 3229) to get expert services in Heating System repair and Emergency Furnace repair.

How Improper Maintenance Of HVAC Could Cost You A Fortune!

You wouldn’t drive your car 100,000 miles without altering the oil. Routine HVAC preventative care is the perfect way to make sure peak performance and trouble free functioning. Preseason care is also significant. It can help prevent a method failure in cold weather or serious hot when you want it most, from becoming unmanageable plus additionally, it may keep your energy bill.

Maintaining your HVAC system can be difficult if you do not know where to begin. First and foremost, it is important to understand why must you maintain your HVAC system.


Importance Of Maintaining Your HVAC


Keep your gear to stop future difficulties and prices that are unwanted. Keep your cooling system and heating system at peak operation by having a contractor do yearly preseason check ups. Contractors get busy winter and summer come, therefore it is better to inspect the cooling system in the heating system as well as the springtime in the autumn. You might plan the check ups round the time changes in the springtime and autumn, to recall.


Energy Reduction Benefits And Cost Saving


Energy can be costly with increasing prices in today’s markets. It is therefore highly beneficial to be able to save energy in every manner possible. One way to do so is to ensure that our HVAC units are constantly maintained and runs efficiently.


HVAC energy prices can be reduced by powerful care by 5 to 40 percent determined by the system or equipment called for. Various HVAC parts desire energy performance degradation or on-going care can happen.


Routine scheduled maintenance of ventilation, heat and air conditioning (HVAC) systems can raise their efficiency, as well as energy savings have been quantified by several studies from care, too.


1. Investigation of the energy savings potential by correcting those failures as well as failures in individual HVAC parts.


2. Entire-system estimates predicated on interviews with HVAC care pros. Energy Operation and HVAC Part Care


HVAC systems have over 100 elements, and energy performance degrades. This graph summarizes studies of the potential energy savings from great care on chiller parts with the largest energy impacts.


How To Perform A Check Up


It’s not as difficult as it seems. An average care checkup should contain the following:

  •  Assess thermostat settings to make certain the cooling system and heating system saves energy while you’re gone and keeps you cozy when you’re house.
  •  Defective electric connections decrease the life of important elements and can cause dangerous operation of your system.
  • Parts and increases the quantity of electricity.
  • A plugged drain impact indoor humidity levels and can cause water damage in the home.
  • Check the beginning cycle of the gear to ensure the system shuts off, and begins, functions correctly.


Summary – Cost Saving Benefits


The energy efficiency cans boost. More quantification of the energy savings will lead building owners to eventually become interested in routine care for their HVAC systems while the first data is supporting. More studies are needed to precisely quantify the return on investment from care tasks, and the energy savings from changing care strategies.


WJR advanced services are serving the areas of Toms River, Marlboro and Red Bank. Call us now (732 500 3229) to get expert services in Heating System repair and Emergency Furnace repair.

Challenges Faced if HVAC is Not Maintained

HVAC stands for heating, ventilation and air conditioning systems used during summer and winter seasons. During summer, the system utilizes its ventilation and air conditioning properties while the heating property is appropriately used during the winter season. Ventilation is needed during both seasons to control the air temperature in a building or car while getting rid of impurities in the air such as smoke, dust, odor and bacteria.


HVAC systems need to be properly maintained on a regular basis if they are to provide top quality services. When you buy or instal an HVAC system, maintenance should begin immediately. Neglecting a good HVAC system or poor maintenance of the system can cause harm to the system undoing all the improvements that were put on the design, as well as the people inside the building. Problems arise that can cause harm to people using a bad HVAC system. Most problems arise due to neglecting air filters in HVAC system that needs regular maintenance. The procedure could warrant cleaning the filters or replacing them altogether.


Filters help clean out impurities found in the air. They are one of the most important components of the ventilation part of the HVAC. Without proper maintenance, filters clog blocking normal flow of air while significantly reducing the efficiency of the HVAC system. This makes the air quality poor and harmful for the people in the building due to chemicals and smells released in the atmosphere that cannot be filtered out of the building. Therefore, it is very important to clean filters regularly and replace them every 1-6 months.


Another problem that could arise when a HVAC system is not maintained is an increase in the utility costs. A broken down HVAC system will use more energy than a good one. This results to increased electricity bills as it uses up more electricity trying to perform its functions. In addition, when a HVAC system is not maintained on a regular basis, some important parts of the system may break down beyond repair such as filters, condenser coils and evaporators. This would call for a replacement of the parts which may be more expensive than the maintenance procedures.


Discomfort is one of the most common outcomes when a HVAC system is not properly maintained. People sweat too much and may even get sick as a result of the chemicals and impurities in the atmosphere unable to be gotten rid of through ventilation. This leads to poor productivity and work efficiency in the office and work areas. In turn, a company or business may suffer great losses if people are unable to give their best work.


In conclusion, a properly maintained HVAC system is able to lower the costs of utility including energy, decreases the costs of replacing broken down components and creates a happy environment in the work place and at home. Therefore, whenever people complain about the efficiency of a HVAC system, it is advisable to look into it immediately before it causes more problems later. Regular maintenance not only reduces costs and efficiency of the equipment, it could also save you from a law suit from an unhappy employee.


WJR advanced services are serving the areas of Toms River, Marlboro and Red Bank. Call us now (732 500 3229) to get expert services in Heating System repair and Emergency Furnace repair.

For those who are experienced working in kitchens, they know the dangers and hazards that come with working with gas. Gas has a volatile property and in a kitchen, where majority of the cooking is done with the help of fire, this has the property to become extremely unsafe. If children are present, they could unknowingly set something on fire and if your gas connection is in poor condition, the results could be very disastrous. Most of domestic households have to make sure that the gas connection pipeline as well as the cylinder present are serviced regularly to ensure and guarantee full safety.


But more often than not, households make sure that gas equipment is serviced regularly. This is a very important process that could possibly save your life. It hardly takes over half an hour at the most to do so and it is a very useful and safe process. The pipes that connect the main gas line to start the fire to one’s kitchen cooker or any other place has to be of the strongest and most insulating material. A service-man will make sure that it is in good condition every once or twice a month. Even with a bad pipeline, there could be sudden dangers. It is up to the owners to make sure that all volatile equipment is in safe distance of fire, and even while cooking there is absolute safety on all accounts.


This brings us to the safety measures that people have to take to ensure safety. First and foremost, the gas connection should be of a reliable source and all the guidelines and standards are taken care of. The person who is responsible for filling, loading and unloading gas cylinders should be reliable and experienced. If he isn’t, there could be a few errors that could be committed that may cause a few problems. The other thing is to make sure that after cooking, the gas is turned off. Always. Some careless and absent-minded people have the tendency to not close the cooker properly after use and forget about it, later on, it could fill the room with gas. And even the smallest spark is enough to cause a massive explosion and disaster.


Gas cylinders that are used in households mainly, must be placed in a vertical manner unless specified otherwise. Secondly, there should be checks always to confirm that the cylinder is the right one to be used. Gas cylinders must not be used for any other purpose apart from transport and storage of gas. Cylinders must never be dragged, rolled or dropped, this could cause friction in some conditions which could lead to fire. When cleaning cylinders, care must be taken to ensure that the valves are closed tightly to avoid any leakage of gas. If there is even a doubt of gas leakage, call up an expert or a fire department to make sure that the place is quarantined off. And always make sure that gas equipment is serviced regularly.

Preventive Maintenance for Better Temperature Optimization in Refrigerators

Commercial refrigeration equipment is equipment used for storing foods, to merchandise food purposes in the retail industry for example supermarkets and also in the food service industry. It can also be described as equipment that gives cold storage for a dining facility or a commercial kitchen. It includes commercial freezers, self- contained and remote condensing refrigerators, commercial refrigerator freezers and commercial ice- cream freezers.


Food managers are advised to comply with green mandates, energy challenges and also utility incentives to save operating cost and also avoid food illness. The lower temperature in the refrigerators helps to lower the rate at which the bacteria that causes food spoilage to reproduce. Optimum temperature for storage of perishable food is 3 to 5 degrees Celsius. A refrigerator is supposed to maintain a temperature above water freezing point. Foods like meat, eggs, poultry, sea foods, dairy products, raw seeds sprout and cooked rice or potatoes promote the growth of bacteria. If left for four hours in 41 degrees to 135 degree the foods can be hazardous.


Another preventive maintenance for temperature optimization is by maintaining your commercial refrigerators between 34 degrees and 40 degrees Fahrenheit. To maintain this temperature one should use refrigerators thermometer. This low temperature helps to prevent food spoilage, growth of micro organisms and also spoilage of enzymes.


One should also keep the freezer at zero degrees or even below to maintain the quality of the frozen foods. The foods in the freezer will last for long if they are stored in temperatures of between -10 to 20 degree Fahrenheit. In fluctuating temperatures the food will get spoilt easily because the micro organisms will grow under warmer temperatures. Other freezers which are known as self –defrosting freezers damage food quality because of the fluctuation of temperatures in them. Even though storing foods in freezers keeps the food from spoiling, it does not stop the foods from changing in color, losing the flavor and it also loses the nutritional quality of the food.


When foods that are stored in the refrigerators are thawed at room temperature, micro organisms grow at the food surface due to warming of the food. The freezers temperature keeps the food from spoiling but they do not destroy the spoilage micro organism. This shows that it is not healthy to eat foods that are directly refrigerated to avoid falling sick or even resulting to death due to the spoilage micro organisms.


One should also dust off his or her condenser coils which are on the rear. The coils help in proper air flow in the refrigerator. One should use a condenser coil brush to remove hairs and dust in the coil. When the air in the coil is blocked, there will be no air circulation causing the refrigerator to have bad odors which may result to food spoilage affecting any person who will consume the foods The refrigerators at home or even the commercial refrigeration equipment should be kept at optimum temperature to avoid food spoilage and growth of food spoilage micro organisms and keep the food for a longer period.

How to Save Money on Air Conditioning

With the summer heat now upon us, more and more people are using their air conditioner units. The following tips will help you reduce the amount of energy you use to run your air conditioner and thus save you money.


Tips to Save Money on Air Conditioning

  1. Adjust the thermostat
  2. Clean the air filter
  3. Get an annual checkup
  4. Think small
  5. Buy Energy Star Appliances